Non Load Bearing Wall | Cost to Remove a Non Load Bearing Wall

Disadvantages of Non Load Bearing Wall

Non Load Bearing Wall

Non load bearing walls separate the room by dividing it inside the house. Thus, such walls do not support the structural weight of the building. Therefore, they do not carry the extra weight of the structure of the building other than their own.

Most builders use load-bearing walls as interior walls when building a house. If the landlord hires a designer or architect to make plans for his building, he should consider before removing the wall for future renovations.

The best way to understand what effect they will have if the walls present in the construction of the house are removed is to know whether the wall is load-bearing or not, which will ensure safe renovation of the building and reduce project costs.

The use of load bearing walls and non load bearing walls in a building, in general, is important in the structure. Any building is built using two types of walls- exterior walls and interior walls. The use of exterior walls, in general, provides a basic structure around your home and protects it from unwanted environments. Interior walls, on the other hand, divide the room.

What Is Non-Load Bearing Wall?

Which Wall is not used as a support in the R.c.c frame structure. It only holds the frame in what is known as a non load bearing wall. This wall is also commonly called the “curtain wall.”

Non load bearing walls are used indoors. These types of walls are mainly used in the building as a room divider. These types of walls mostly don’t work for any other purpose.

This type of wall can be removed without compromising the safety of the building. Because it is not responsible for gravity support in the structure of the building. This type of wall separates the room without supporting any load or weight of the ceiling or floor.

This type of wall is only able to support its own weight and it is able to withstand the force of the wind blowing as the outer wall in the building; It cannot support the weight of the building structure on its own. It has a non-tolerant wall compared to a load-bearing wall.

Also Read: What Is Retaining Walls? | Uses of Retaining Wall | Types of Retaining Wall | Advantages of Retaining Wall

Application of Non Load Bering Wall

  1. Any non load bearing walls can be removed for renovation, without losing the safety of the house structure.
  2. Mostly, high rise building is designed to separate the floor into spaces as interior walls.
  3. The non load bearing wall is made to reduce the dead load in the structure of the building.
  4. The lightweight material is usually used for this type of wall. So. It is safely used as a non load bearing wall in a building structure.
  5. It does not carry any load in the structural frame system in the building. Therefore, the architecture in the building can be given a beautiful look.
  6. In this type of wall opening for doors and windows can be made easily. Which does not affect the performance of the structure of the entire building.
  7. This type of wall can be easily renovated by removing any part of the building at any time and in any area.

Thickness of Non load bearing Wall

Exterior non-bearing masonry is designed based on wall thickness requirements. The standard specification for brick masonry wall by ACI 530-11 should be used. It typically has 152 mm (6 inches) for a one-story building and 203 mm (8 inches) for a multi-story building.

Also Read: What Is Folded Plate? | Folded Plate Structures | Folded Plate Staircase | Advantages & Disadvantages of Folded Plate Structures

Types of Non-Load Bearing Walls

1. Hollow Concrete Block Wall:

Non load bearing wall is done in the internal part of the building using hollow blocks as walls. It gives stability and strength without any waste of material.

Lightweight blocks are made of aerated concrete. It is cured until it reaches the construction site. So, it can be used as a very durable and strong material in the structure of the building.

2. Facade Bricks Wall:

The brick facade is known as the brick veneer. It is provided on the walls of the building as a layer of brick. The brick facade aesthetics and insulates the building.

This type of brick is generally durable and practically maintenance-free. The brick facade does not lose its luster. The brick facade is environmentally friendly.

3. Hollow Bricks Wall:

Hollow bricks are perforated in the horizontal or vertical direction. When hollow bricks are compared with other traditional bricks, hollow bricks perform better.

Hollow bricks are made using materials such as recycled waste and coal ash, rice dust, and fly ash. Therefore, it is used as an environmentally friendly building material. This type of brick is certified by the Green Building Council of India.

Since these bricks are much lighter in weight than solid bricks, their work can be done easily and quickly, which helps in the early completion of the project.

4. Non Load Bearing Partition Wall:

The partition wall is made to divide a room or area as an interior wall in a building. Generally, partition walls are non load bearing type walls.

Nowadays, partition walls divide a room into multi-rooms in a building. Partition walls are usually done to get the privacy and service of the room. However, depending on the design and requirements of the building, different types of partition walls are used.

Non Load Bearing Wall Framing-

Sometimes a non load bearing wall is required if the wall is built above the floor in a temporary office building. For this, different types of walls can be made using different materials. For non-load bearing wall is usually made using wood, steel, aluminum, and plastic, etc.

Wooden wall framing is required to make the wall vertical to the floor. For this, wooden frames are attached to the top, bottom, and side frames of the wall. The load-bearing wall should be strong enough to withstand wind or tilt loads.

Also Read: What Is Well Foundation? | Shapes of Well Foundation | Component of Well Foundation | Advantages & Disadvantages of Well Foundations

How to Remove a Non Load Bearing Wall?

This type of wall can be removed very easily when repairing a building. This type of wall does not carry any frame structural load on it. Therefore, there is no need to support the wall using any hydraulic jack for renovation in the residential building. But if the wall is made of masonry material, the top of the wall should be partially removed step by step.

Before removing the Non Load Bearing Wall, cut off all electrical equipment and wires in the building. Also safely remove sharp or pointed tools along the side of the wall.

If the wall is made of wood or steel frame along the floor in the building, the wall can be easily removed.

Cost of Remove a Non Load Bearing Wall

Depending on the needs of the entire project it can cost between $ 300 and $ 10,000 to remove the wall in general. Cost factors include wall size, expert advice, and repairs to your floor and sidewalls.

Removing an interior, non-load-bearing wall is not a difficult task. In non-load-bearing wall removal, the wall is inspected for wiring, plumbing, or other elements.

Also Read: What Is Modified Proctor Test? | Purpose of Modified Proctor Test | Modified Proctor Compaction Test Apparatus | Modified Proctor Test Procedure | Calculation of Modified Proctor Test | Difference Between Standard Proctor Test  Vs Modified Proctor Test

Advantages of Non Load Bearing Wall

Advantages of Non Load Bearing Wall

Some of the advantages of this type of wall are described below:-

  1. Building a non bearing wall involves less structural work and faster work. Also, you can use a non load-bearing wall for a more creative design.
  2. These types of walls have the potential to reduce building costs in high-rise building projects. Because these types of walls are thinner, they take up less space on site.
  3. In this type of wall opening for doors and windows can be made easily. Which does not affect the performance of the structure of the entire building.
  4. Any non load-bearing walls can be removed for renovation, without losing the safety of the house structure.
  5. The non load-bearing wall is made to reduce the dead load in the structure of the building.
  6. This type of wall can be easily renovated by removing any part of the building at any time and in any area.

Disadvantages of Non Load Bearing Wall

Disadvantages of Non Load Bearing Wall

  1. Because these types of walls are usually thin and light, the insulation value may not be significantly higher than that of load-bearing walls.
  2. During seismic action, the non-load-bearing wall works poorly in the structure of the building.
  3. Construction of a non-load-bearing wall in an office building is usually slow.
  4. Sometimes a non-loading wall is used in a high-ceilinged interior space that may require additional bracing to maintain stability.

Frequently Asked Questions (FAQ)

Removing a Non Load Bearing Wall

This type of wall can be removed very easily when repairing a building. This type of wall does not carry any frame structural load on it. Therefore, there is no need to support the wall using any hydraulic jack for renovation in the residential building. But if the wall is made of masonry material, the top of the wall should be partially removed step by step.

Cost of Removing Non Load Bearing Wall

The average cost to remove a non-load-bearing wall is $500 to $2,000. Removing a load-bearing wall costs $4,000 to $10,000 for a single-story house, and between $9,000 and $15,000 for a multi-story home. Prices depend on the wall size, rerouting utility lines, and if extra support is required.

Non Load Bearing Columns

Non load bearing Columns separate the room by dividing it inside the house. Thus, such walls do not support the structural weight of the building. Therefore, they do not carry the extra weight of the structure of the building other than their own.

Non Structural Wall

The term “nonstructural walls” refers to walls that are not part of the load-carrying system, but may become load bearing upon attachment and interaction with other elements. Evaluation must be made to determine if they are capable of resisting seismic forces required by Section 2.4.

Non Load Bearing Wall Thickness

Exterior non-bearing masonry is designed based on wall thickness requirements. Specifications for masonry wall by ACI 530-11 should be used. It typically has 152 mm (6 inches) for a one-story building and 203 mm (8 inches) for a multi-story building.

What Are the Main Function of Non-Load Bearing Wall?

The Main Function of load-bearing walls separates the room by dividing it inside the house. Thus, such walls do not support the structural weight of the building. Therefore, they do not carry the extra weight of the structure of the building other than their own.

What Is the Purpose of a Non Load Bearing Wall?

The main purpose of non-load-bearing walls is to place them inside the house as a room divider. It does not support any structural component of the building. They are not able to bear the extra weight of the structure of the house except their own.

Can a Brick Walls Be Non Load Bearing?

In residential construction, floor joists are usually built parallel to the floor finish as a non-bearing partition wall. For a better look, joist or blocking panels can be added to the designer’s non-bearing wall below and above.

Are Bearers Required Under Non Load Bearing Walls?

The use of non-load bearing walls usually separates the rooms inside the house and does not support any floor or ceiling above it. All non-load bearing walls should have cyclone rods from the upper plate to the lower slab.

Do I Need Building Regulations to Remove a Non Load Bearing Internal Wall?

Effects fire precautions to remove the non-load-bearing wall. It requires an application to remove the support walls in the perimeter of the stairs.

How Much Does It Cost to Remove a Non Load Bearing Wall?

The cost of removing non load bearing wall is between $ 300 and $ 10,000.  Cost factors include wall size, expert advice, and repairs to your floor and sidewalls.

How Hard Is It to Remove a Non Load Bearing Wall?

Removing an interior, non-load-bearing wall is not a difficult task. In non-load-bearing wall removal, the wall is inspected for wiring, plumbing, or other elements.


Like this post? Share it with your friends!

Suggested Read –

Leave a Reply

Your email address will not be published. Required fields are marked *