How Much Does It Cost to Pave a Driveway?

How Much Does It Cost to Pave a Driveway

How Much Does It Cost to Pave a Driveway?

Currently, pave a driveway cost ranges from $5.45 to $15.10 per square foot. This cost can vary depending on the concrete material and size of the driveway. Primary factors affecting driveway paving costs include driveway size, materials such as concrete or asphalt, site preparation, and local labor costs.

Expensive Pave a driveway materials cost $31 per square foot. However, the approximate cost to install a driveway between $1.50 to $7.25.

How Much Does It Cost to Pave Driveway Per Square Foot?

Average Cost $12
Highest Cost $32
Lowest Cost $3

How Much Does It Driveway Cost?

The average cost per square foot to pave a driveway is $2 to $15, although driveway paving involves several factors. Which is applicable in every situation. How much it will cost to build a driveway depends on the type of material you choose. Then you determine your total area. Keep in mind that labor costs and your geographic location will also affect driveway pave costs.

How Much Does It Driveway Cost Per Square Foot: Material Type

Depending on the material, building a driveway can cost anywhere from $1,500 to more than $11,000. Concrete is mostly used in making driveways. It is strong and long lasting. Asphalt, or “blacktop,” gravel, pavers, and rubber are some other popular types of driveway options.

#1. Concrete Cost Per Square Foot

In some cases, concrete can be less expensive and more low-maintenance than alternative building materials. Concrete driveway cost per square foot is $4 to $8. It can be colored, stamped with a design, bordered or custom finish. Its lifespan is up to 30-40 years. A concrete driveway is a fantastic choice for hot regions.

Stamped concrete cost per square foot between $9 and $13. But, more complex projects cost $20 per square foot. The stamped concrete cost may vary depending on the material and labor costs in your area and how difficult the job is.

How Much Does It Cost to Build a 20×20 Concrete Patio?

20×20 foot concrete patio costs between $1,200 and $6,000, including labor and materials. Concrete patio costs may increase for complex decorative colors and finishes.

#2. Asphalt Driveway Cost Per Square Foot

Asphalt driveway cost is usually cheaper than concrete. Asphalt Cost Per Square Foot is between $2 and $4. Asphalt prices tend to go up and down with the price of crude oil.

#3. Cost of Gravel Driveway Per Square Foot

The cost of gravel driveway per square foot is $2 to $3. A 12×25 (1-car) gravel driveway costs $325 to $925 per foot. A 24×24 (2-car) gravel driveway costs $610 to $1,850 per foot. Gravel driveway cost depends on the size and depth of your driveway, type of gravel, labor, soil conditions, excavation, grading, permits, etc.

Cost to Install a Gravel Driveway

Type Size (W×L) Average cost
1-Car gravel driveway 12×25 $300 – $900
2-Car gravel driveway 24×24 $600 – $1,800
3-Car gravel driveway 30×24 $720 – $2,200
Gravel driveway grid 24×24 $1,700 – $4,000
Resin-bound driveway 24×24 $4,000 – $6,300
Tar and chip driveway 24×24 $1,200 – $2,900
100′ gravel road 12×100 $540 – $1,000
250′ gravel road 12×250 $1,350 – $2,500
500′ gravel road 12×250 $2,700 – $5,000

How Much Does It Cost to Repave a Driveway?

How Much Does It Cost to Repave a Driveway

To repave a driveway, you will need to remove the old paving material and level the ground. You can also make changes like widening your driveway, changing paving materials, and adding other features.

400-square-foot Repave a driveway cost between $2,800 and $9,600. It costs $400–$1,600 to tear up and remove an old driveway. Various factors also affect it. Like, Material type, square footage.

Driveway Repaving Cost by Diffrent Material

Material Cost per Square Foot
Total Materials and Labor
Asphalt $1–$5 $7–$15
Stamped concrete $2–$3 $12–$18
Concrete $4–$7 $6–$20
Rubber $5–$10 $10–$25
Gravel $1–$3 $4–$10
Paving stones $7–$20 $40–$75
Brick pavers $1–$2.50 $10–$30
Stamped concrete $2–$3 $12–$18
Exposed aggregate $3–$7 $6–$15

How Much Does Paver Driveway Cost?

How Much Does Paver Driveway Cost

Paver driveways cost from $1 to $30 per square foot. Paver driveways are available in a variety of style and design options. Replacing an existing concrete driveway with pavers costs $2 to $6 per square foot.

Driveway Pavers Cost Per Square Foot

Item Cost Per Square Foot
Pavers $2 – $15
Base Materials $2 – $3
Labor $6 – $10
Total Install Cost $10 – $40

How Much Does It Concrete Driveway Pavers Cost?

For materials and installation, concrete driveway pavers cost between $10 to $20 per square foot. The cost of concrete driveway pavers  can vary depending on the size, thickness, design, strength and color of your driveway.

How Much Does It Paver Driveway Cost By Materials?

Paver Type Cost per Sq.Ft.
Brick $1 – $25
Concrete Blocks $7 – $13
Paving Stone $7 – $30

How Much Does Tar and Chip Driveway Cost?

Chip and seal or macadam driveways cost between $2.5 and $6.5 per square foot for the material. To create this type of driveway, the surface is prepared by spreading hot liquid asphalt and spreading layers of stone aggregate over it.

It is an excellent driveway for cold climates. Its rough surface provides excellent grip, making it very less slippery. However, tar and chip driveways have a lifespan of 10 to 15 years. So you have to do resurfacing every 10 years to prevent deterioration. This type of driveway is also known as seal chip, chip-and-seal, or liquid-asphalt-and-stone.

How Much Does Exposed Aggregate Driveway Cost?

Exposed aggregate driveway cost $ 3.5 to $ 6.5 per square foot for materials. It is also known as “pebble finish”. It gives the surface appeal to more curb. The rough surface of the exposed aggregate driveway makes it less slippery and more stable. It lasts for 40 years. Exposed aggregate driveway needs to be cleaned at least once a day, to keep them free from dust, dirt and other debris.

How Much Does Tarmac Driveway Cost?

A tarmac driveway costs about $4,500. Costs for labor and asphalt material range from $7 to $15 per square foot. If you buy tarmac material by the ton, you can expect between $100 and $200 per ton of tarmac.

How Much Does Rubber Driveway Cost?

Rubber driveways are an environmentally friendly option. Rubber Driveway Cost can range from about $5 to $10 per square foot for the material. It is poured on a concrete or asphalt layer. This type of driveway is a durable and weather-resistant option. You can customize it with best colors and patterns as per your choice.


Like this post? Share it with your friends!

Suggested Read –

How Much Does a New Garage Door Cost?

How Much Does a Rubber Flooring Cost?

How Much Does Travertine Flooring Cost

How Much Does Peel and Stick Flooring Cost

Epoxy Basement Floor Cost

Frequently Asked Questions (FAQ)

How Much Does It Cost to Pave Driveway 100 Square Feet?

Cost to pave 100 square feet ranges between $300 and $1500. The cost of a pave driveway depends on the material, size of the driveway and installation requirements. It has expensive materials costing as much as $30 per square foot while cheaper materials cost as little as $3 per square foot.

How Much Does It Cost to Pave a Driveway with Asphalt?

Asphalt driveway costs between $2 and $4 per square foot. it is less than a concrete driveway. Asphalt prices tend to go up and down with the price of crude oil. On the other hand, a standard installation of a concrete driveway costs between $4 and $6 per square foot.

How Much Does It Cost to Replace an Asphalt Driveway?

Cost to Replace an Asphalt Driveway about $5 per square foot to remove the existing asphalt, prepare the surface, lay down gravel and pave an asphalt driveway with a one-ton paver.

How Much Does It Cost to Pave a Single Car Driveway?

Pave a Single Car Driveway cost is $2 to $15, although driveway paving involves several factors. Which is applicable in every situation. How much it will cost to build a driveway depends on the type of material you choose. Then you determine your total area. Keep in mind that labor costs and your geographic location will also affect driveway pave costs.

How Much Does It Cost to Pave a 2 Car Driveway?

The average two-car driveway cost between $3000 and $5000 per1000 square feet with materials and labor. The cost may vary depending on the material, driveway size and installation requirements.

Leave a Reply

Your email address will not be published. Required fields are marked *